slip ring manufacturer

With the country's transformation of the ship's shore power project, all ships must have a winch that can be connected to the shore-based power supply, which has also brought a large wave of orders to the winch industry. As an indispensable rotating transmission component in the cable winch, the conductive slip ring has also received a large number of orders. However, since the shore power winch in the shore power transformation is used on the ship, this makes the matching conductive slip ring also have a positive design, so that it can be used normally on the ship.

When choosing a product, we must first understand the basic characteristics, parameters and functional effects of the product. There may be many types and sizes of the same product. We should choose suitable parts according to the size of our equipment, operating environment and other factors. In particular, the conductive slip ring products are very important, and the type and specification are very important, otherwise it may lead to inability to install or even cause major safety production accidents. Therefore, before installing slip rings, choosing the right slip ring is the first priority.

We all know that conductive slip rings are electrical products that can rotate and transmit various media. We have also encountered many problems when using conductive slip rings. One is that the signal transmitted by the conductive slip ring is always unstable, etc. In fact, these problems are small problems we encountered when using the conductive slip ring. Today, the editor of Jiachi conductive slip ring will tell you about the conductive slip ring. What should I do if the transmitted signal is unstable and is always disturbed.

With the development of the times, the progress of science and technology, automated equipment has become the backbone of the world's manufacturing industry. As an important electrical component in automation equipment, the conductive slip ring has also developed by leaps and bounds with the advancement of science and technology, and the traditional conductive slip ring has also Known as the collector ring, traditional carbon brushes and copper rings are used as contact materials, and the rotating copper ring is rubbed against the carbon brush to ensure the rotational transmission of the equipment. Because the contact material of this traditional collector ring is a common carbon brush, the medium it transmits is limited to common current and simple control signals. However, with the advancement of technology, automation equipment has entered electrification and networking, and modern automatic equipment is often controlled through the network.

Tethered UAV, also known as tethered UAV, is a special form of multi-rotor UAV. It uses ground power transmitted through tethered cables as a power source instead of traditional lithium batteries. It is characterized by the ability to hover in the air for a long time. The tethered drone is composed of a ground high-voltage DC voltage stabilization system, a pay-off device, a synchronous reel, a mooring cable, an air voltage stabilization module and a backup battery. The high-voltage DC voltage stabilization system And the synchronous reel is installed on the reel, and the tethered cable is connected with the voltage regulator module and the backup battery.

At the beginning of March this year, JARCH conductive slip ring was commissioned by a domestic welding robot company to provide a new type of welding robot with a conductive slip ring with high current through the shaft. The technology of Jiachi conductive slip ring was designed according to the needs of customers. The conductive slip ring that matches the welding robot, this conductive slip ring has been verified on the customer's new welding robot.